-6%

Diamond Router Cutter Ekonomik Z2+1 – D20x45 L105 S=20×50 (10DP+1HW)

Fachmann

NA VOLJO:

NI NA ZALOGI

344,03 EUR 365,99 EUR cena brez DDV: 281,99 EUR

NI NA ZALOGI

1000 mnenj za Diamond Router Cutter Ekonomik Z2+1 – D20x45 L105 S=20×50 (10DP+1HW)

Zaenkrat še ni mnenj.

Samo prijavljeni uporabniki, ki so kupili ta izdelek, lahko napišejo mnenje.

• Hardened steel body.
• High-quality diamond edges.
• HW plunge tip.
• 2x Resharpenable.
• 50x longer life.
• Feed speed up to 10 m/min.

The M172 Diamond Cutters are designed for all types of CNC machines. Much better performance than one flute tool thanks to two flutes. Cutter life is approximately 50x longer than that of a standard tool with carbide HM edges. Ideal tool for the production of joints, grooves or for trimming of materials such as DTD, melamine and laminate, MDF, HPL and veneered DTD. Consider the type of operation and type of material before routing.

Axial angle geometry towards the centre of the board allows fine finish on the upper and lower edge.

The labelling Ekonomik marks tools with a basic height of the diamond knife. The height of the knife doesn’t worsen the quality of the tool, it only affects the number of times it can be resharpened. Therefore, these tools are cheaper because of the height of the Dia knife.

Properties:
• Maximum speed: max. 24 000 rpm
• Regular speed: 18 000rpm
• Feed speed: 5-15 m/min
• DIA Leaf height: 2,5 mm

Šifra: M172-20231 Kategorija:
Teža 0.194 kg
Proizvajalec

Poreklo

SKU

M172-20231